Welcome!

Dear friends! We are glad to welcome you on pages of our portal devoted control line, radio-controlled and free fly models of planes...

More...

Control line training model PML-1001 "JUNIOR"

Among beginning control line plane aeromodellers there is an opinion that at training model manufacturing excessively to trouble itself it is not necessary - all the same this flying machine can sustain at the best pair of flights.

That, with it you will not argue: really, unsightly, carelessly made and badly grouped кордовый самолетик finishes the flight service at times on the very first circles over an airfield.

We are glad to give to your attention a set for independent construction control line plane model PML-1001 "JUNIOR"

Control line model class F2B for initial training PML-1001 "JUNIOR"

Length of model (greatest)..............................................0,552 м
Wingspan ..........................................................................0,700 м
Model height (without the gear)......................................0,158 м
Model height (with the gear)...........................................0,251 м
Distance from an axis of the screw to the earth..........0,126 м
Lay corner.............................................................................7 degr
Weight (without the engine and fuel) .............................. 0,5 kg
Engine (into the complete set doesn't enter)...... from 2.5 cm3

The set is fully completed by all details including the chassis and elements of fuel system. So cords are included in a set (ready with locks) and preparation for the management handle.

We have tried to make assemblage of model enough simple.

In preparation of details the laser is used is sharp a material that essentially facilitates and accelerates model construction.

Set general view

Here there will be a set structure (prepares)

Model design

1 - the top lath of a longeron (a lath 5X5 mm), 2 - the back edge covered (a lath 5X20 mm), 3 - a rib (an interline interval 1мм), 4 - lateral glass of a cabin (plexiglas 1мм), 5 - a fuselage (plywood 10мм), 6 - the stabilizer (plywood 6мм), 7 - fin (plywood 6мм), 8 - a direction wheel (plywood 6мм), 9 - an elevator (plywood 6мм), 10 - the tail chassis ( the item wire ОВС of 2 mm + a castor), 11 - the amplifier (an interline interval 1мм), 12 - the strengthened rib (plywood 3мм), 13 - the forward edge covered (a pine lath 10X10 mm), 14 - the basic wheel 56х20, 15 - a chassis rack (the item Wire of 3 mm), 16 - the engine, 17 - the bottom lath of a longeron (a lath 5X5 mm), 18 - a fuel tank on 60 ml (2 oz), 19 - a lateral overlay (an interline interval of 1 mm), 20 - a lug under a management rocking chair, 21 - drafts from a management rocking chair to cords, 22 - draft of an elevator (a wire 2.5мм), 23 - "kabanchik" an elevator, 24 - a management rocking chair, 25 - prevailing torque type wheel nut, 26 - a restrictive nut of a wheel, 27 - a motor-frame (plywood of 12 mm)

The instruction on assemblage can be downloaded (RUS) here Updated November 20, 2014, (variant in English prepares)

Some survey photos

On a photo model with engine ОS Max LA 15 and the screw 8х4

ATTENTION !!! Changes made on today's date in the design model PML-1001 "JUNIOR":

In connection with a change in the design of the chassis, changed layout of their attachment to the fuselage (see fig.), as well as unnecessary are removed from the set of covers of veneer - mount amplifiers. Engine mount also changed (see fig.).

ВIn the instructions, on page 23, changed image view before assembling the wing (see pic) Added: do Not forget to attach the sinker as shown in Fig. below.